B-MAG INTEGRATED MAGNET LOCK FOR SWING GATES

Description

The magnetic lock is designed to be mounted in the pole to remain inconspicuous and aesthetic. Convenient and robust installation with Quick-fix. This lock is resistant to extreme weather conditions. Special rubbers protect the gates against damage.

Specifications:

• Guaranteed holding force tested on every magnetic lock
• Minimal pulling force: 2500N (250 kg)
• 500h salt spray resistant! SGS certified (ISO 9227)
• Special two-layer protective coating developed for outdoor use
• Anti-residual magnetism kick-off system
• Current: 460mA / 12V or 230mA / 24V

Installation manual PDF

Additional information:

SPECIFICATIONS

• The magnet lock shall be installed invisibly and aesthetically in the gate frame, whilst maximal passage space is maintained.
• The magnet lock shall have a rubber bumper to prevent shaking of the gate and damage to the gate.
• The magnet lock shall endure no damage from harsh handling of the gate.
• The magnet lock shall be vandal-proof thanks to a raised edge on the magnet housing.
• The magnet lock shall have a flexible armature plate to guarantee a normal closing even if the gate isn’t perfectly aligned.
• The magnet lock shall guarantee an easy opening thanks to an anti-residual magnet kick-off system.
• The magnet lock shall be available in silver or black.
• The magnet lock should be designed and manufactured in Europe or in the United States.
• The magnet lock shall require a current of 460mA/12V or 230mA/24V.

PERFORMANCE

• The magnet lock shall effectively have been tested for a guaranteed pulling force of 250kg.
• The magnet lock shall be specifically made for outdoor use and shall be resistant to extreme weather conditions.
• The magnet lock shall have a special two-layer protective coating developed for outdoor use.
• The magnet lock shall have been tested for 500.000 movements.
• The manufacturer warranty shall be 2 years.

INSTALLATION

• No welding shall be required to install the magnet lock.
• The magnet lock shall be installed with 2 stainless steel bolts.

MATERIAL

• The magnet lock should be certified for 500h salt spray testing by a certified organization.
• The magnet lock shall be made of a powder coated aluminium housing. The powder coating shall be according to the Qualicoat standards.
• The magnet lock shall be fully weather- and dustproof (IP68).
• The magnet lock shall have an UV-resistance against discoloration of 500h.